跳至主要内容

Is there a difference between adhesive tape and glued paper?

Water-adhesive paper structure: based on kraft paper, coated with water-soluble adhesive. Features: Appropriate amount of water, the rubber surface can be sticky; early tack, strong wet adhesion, good permanent adhesion; The water-storing and solidification conditions are not affected by the hot and cold weather; the tensile strength is good, the tensile strength is large, and it is not easy to break; the good raw materials are selected, non-toxic and non-polluting; if the residual adhesive tape on the surface of the bonded object is removed, the sanding can be used. If the machine or abrasive cloth is sanded in an appropriate amount, the tape can be removed without leaving any traces.
Uses: Suitable for seams and joints of veneer and wood. It is mainly used for panel mosaic in industries such as furniture and wooden doors. It is also used in the plywood and curved wood industries, repairing medium plates and veneers. Color: white, natural color specification: 12mm*500 code 16mm*500 code, etc. It can also be customized by the buyer's width length (divided with punched tape and non-perforated tape)3. Medical coated dialysis paper coated paper is suitable for the automated production of medical device packaging with higher requirements on peel strength and stricter peeling effect.
 According to different glued papers, there are two types, one is polyurethane reactive type water gel, uniform coating, 1-3 grams of glue; the other uses solvent-free EVA hot melt adhesive, the production process is unique, That is, it can be dried, and the amount of glue can be from 2-3 grams to more than 10 grams according to requirements; frame coated paper can also be provided upon request. The above two types of coated paper generally use a heat sealing temperature of 105-140 degrees Celsius and a heat sealing pressure of zero.
 4 kPa or so, heat sealing time 0.5 seconds, heat sealing width 4-10mm, paper bag peeling tension can reach or exceed 2nu and clean without paper scraps. the above. Which one can meet your peel strength, pull, effect, and sterilization requirements.

评论

发表评论

此博客中的热门博文

Reference Standard For Seal Verification of Sterilization Pouches For Medical Devices

With the increasing demand for  sterilization pouches  of medical devices, quality and safety inspection have become more and more stringent. sterilization pouches of medical devices (blister box +  tyvek roll  material,  sterilization paper bag , etc.) as a form of packaging directly in contact with the device and used to block microorganisms. No matter what form of packaging, it has two characteristics, which can meet the sterilization operation and remain sterile until the transportation conditions are used. Therefore, relevant departments began to focus on the review requirements of sterile packaging and make specific requirements for its performance and quality.   As we all know, GB/ t19633-2005 "packaging of ultimately sterilized medical devices" is one of the authoritative standards in the current sterile packaging standards. It is equivalent to iso11607-2003 "packaging of ultimately sterilized medical devices". Clarify the basic performance req...
12 条评论
阅读全文

Medical Sealing Machine Operation & Maintenance Manual（I）

  I. About Thank you for choosing  KM100 series of sealing machine . To maximize its performance,please carefully read this manual and install and operate it by strictly following this manual to ensure its safety and reliability in use. We recommend placing the manual in an accessible place for better reference during the operation. II. Applied Area Automatic  medical sealing machine , 100-L series, is capable of continuous paper-plastic bag, 3D paper-plastic bag and paper-paper bag sealing. The sealing process satisfies the requirements of high-temperature steam sterilization, low-temperature ethylene oxide sterilization, hydrogen peroxide plasma sterilization and radiation sterilization. Seal quality meets corresponding international standards and GMP recognition. Sealable materials: Compliance with EN868-5 and YY/T 0698-5 bags and volumes; Compliance with EN868-4 and YY/T0698-4 paper bags; High density polyethylene materials (such as Tyvek); Aluminum foiled materials. ...
发表评论
阅读全文

Definition And Use Of Sterilization Or Chemical Indicator

  Sterilization indicator  tape and label   Definition: Wrinkle paper or label paper as the base material, coated with color-changing ink as sterilization indicator, back coated with pressure sensitive adhesive.  The indicating tape used for chemical monitoring outside the pressure steam  sterilization package , when reaching certain sterilization conditions 121℃, 20 minutes or 132℃, 3 minutes, the chemical indicating stripe on the back base of wrinkled paper will change from light yellow to black.   USES:   1. Used to mark whether the package has been treated by pressure steam sterilization process.   2. If the discoloration is uneven or incomplete, it may indicate that the package has not been sterilized in accordance with the conditions.   3, wrap the parcel (if no sealing tape is used).   4, sterilization information can be recorded (operator, sterilization period, item name, pot, etc.).   Chemical instruction card for...
1 条评论
阅读全文